This is the BVV™ V4D 4CFM Two Stage Vacuum Pump used for Lathe Vacuum chucking, Wood Stabilizing and botanical extraction.
Key Feature
- Internal Check Valve
- Oil Mist Filter Cap
- Larger Oil Reservoir for longer oil life
- Lightweight
- Rubber Feet for noise dampening
- Reliable, economical, and efficient
|
Models |
BVV4D |
|
Stage |
2 |
|
Ultimate Vacuum (Microns) |
15 |
|
Refrigerant Classes |
A1 Non-Toxic, Non Flammable |
|
Dimensions (in) |
12.4 x 4.8 x 10.16 |
|
Weight (lbs) |
19.4 |
|
Free Air Displacement |
4.3 CFM |
|
Motor Size (HP) RPM |
1 HP 3440 RPM |
|
Oil Capacity |
10oz / 300ml |
|
Voltage |
110V 60 Hz |
|
Power Cord |
Hard Wired 3m / 9.8′ Power Cord |
|
Power Switch |
Standard On / Off |
|
Operating Temperature Range |
32F to 125 F (0C to 52C) |
|
Gas Ballast Valve |
Yes |
|
Intake Fittings |
Stainless Steel Inlet Fitting with 1/4″ SAE & 3/8″ JIC Male Ports |
Pump Warranty Information
Customers using solvents such as stabilization resin, rotaries (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™)
-
If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
-
These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.
-
When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)
-
To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.
Reviews
There are no reviews yet.